Load data for .30-30 Win. + .308 | 150gr | Barnes XLC BT

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Barnes XLC BT
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.200" \| 30.5mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.727" \| 18.5mm
Shank Seated Depth:	0.602" \| 15.3mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B614_C328
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 72 loads in caliber .30-30 Win. with .308 | 150gr | Barnes XLC BT bullet and 36 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	40886	88%	**21	100%
ADI AR 2219	<<locked>>	90%	41089	89%	**47	96%
Accurate 2015	<<locked>>	96%	41263	89%	**38	98%
[Accurate 2460]*	<<locked>>	95%	41336	89%	**34	93%
Accurate 2495	<<locked>>	96%	33286	72%	**88	96%
[Accurate 2520]*	<<locked>>	96%	35433	76%	**78	92%
Alliant AR-Comp 👍	<<locked>>	96%	36869	79%	**21	99%
Alliant Reloder-10x 👍	<<locked>>	93%	41452	89%	**54	99%
Alliant Reloder-7	<<locked>>	84%	40350	87%	**75	99%
Baschieri & Pellagri 106	<<locked>>	90%	41147	89%	**65	97%
[Hodgdon Benchmark]*	<<locked>>	95%	40741	88%	**75	92%
Hodgdon H322	<<locked>>	96%	41089	89%	**47	96%
Hodgdon H335	<<locked>>	91%	41104	89%	**51	95%
Hodgdon H4198	<<locked>>	87%	41727	90%	**59	96%
[IMR 3031]*	<<locked>>	97%	32721	70%	**36	94%
IMR 4198 👍	<<locked>>	90%	40886	88%	**95	99%
[Lovex D073.4]*	<<locked>>	93%	41278	89%	**18	93%
[Lovex D073.5]*	<<locked>>	95%	41336	89%	**34	93%
Norma 200 👍	<<locked>>	88%	40495	87%	**18	99%
[Norma 202]*	<<locked>>	97%	36289	78%	**72	93%
[ReloadSwiss RS 40]*	<<locked>>	94%	40770	88%	**28	93%
Rottweil R 901	<<locked>>	97%	40335	87%	**11	95%
SNPE Vectan BA6 1/2	<<locked>>	83%	41075	88%	**08	100%
SNPE Vectan SP 10	<<locked>>	90%	40625	88%	**41	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	40030	86%	**49	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32576	70%	**21	93%
[Somchem S321]*	<<locked>>	96%	41017	88%	**44	92%
Somchem S335	<<locked>>	96%	37985	82%	**46	95%
Vihtavuori N120	<<locked>>	89%	41466	89%	**88	100%
Vihtavuori N130	<<locked>>	95%	40988	88%	**92	99%
Vihtavuori N133	<<locked>>	96%	35549	77%	**00	96%
[Vihtavuori N135]*	<<locked>>	96%	27427	59%	**82	92%
[Vihtavuori N140]*	<<locked>>	96%	33779	73%	**93	93%
[Vihtavuori N530]*	<<locked>>	96%	41176	89%	**31	92%
[Vihtavuori N540]*	<<locked>>	96%	33431	72%	**13	92%
[Winchester 748]*	<<locked>>	97%	41336	89%	**60	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	34882	75%	**19	100%
[ADI AR 2219]*	<<locked>>	81%	31140	67%	**54	92%
[Accurate 2015]*	<<locked>>	81%	26556	57%	**46	93%
[Accurate 2460]*	<<locked>>	89%	34040	73%	**06	90%
[Accurate 2495]*	<<locked>>	82%	21944	47%	**09	90%
[Accurate 2520]*	<<locked>>	93%	32300	70%	**16	90%
[Alliant AR-Comp]*	<<locked>>	81%	24149	52%	**13	94%
Alliant Reloder-10x	<<locked>>	81%	29457	63%	**24	96%
Alliant Reloder-7	<<locked>>	81%	36637	79%	**10	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31473	68%	**88	93%
[Hodgdon Benchmark]*	<<locked>>	89%	35273	76%	**70	90%
[Hodgdon H322]*	<<locked>>	83%	28514	61%	**88	91%
[Hodgdon H335]*	<<locked>>	81%	30342	65%	**34	90%
[Hodgdon H4198]*	<<locked>>	81%	35346	76%	**44	94%
[IMR 3031]*	<<locked>>	89%	26658	57%	**82	90%
IMR 4198	<<locked>>	81%	31618	68%	**21	97%
[Lovex D073.4]*	<<locked>>	87%	34389	74%	**96	90%
[Lovex D073.5]*	<<locked>>	89%	34040	73%	**06	90%
Norma 200	<<locked>>	81%	33547	72%	**96	98%
[Norma 202]*	<<locked>>	89%	29327	63%	**24	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	32938	71%	**77	90%
[Rottweil R 901]*	<<locked>>	85%	29849	64%	**01	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	38479	83%	**72	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	31009	67%	**51	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	29878	64%	**62	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	27891	60%	**19	90%
[Somchem S321]*	<<locked>>	93%	37420	81%	**78	91%
[Somchem S335]*	<<locked>>	85%	27108	58%	**23	90%
Vihtavuori N120	<<locked>>	81%	33025	71%	**51	100%
Vihtavuori N130	<<locked>>	81%	28021	60%	**42	95%
[Vihtavuori N133]*	<<locked>>	81%	23859	51%	**31	90%
[Vihtavuori N135]*	<<locked>>	93%	24990	54%	**16	90%
[Vihtavuori N140]*	<<locked>>	92%	29994	65%	**11	91%
[Vihtavuori N530]*	<<locked>>	93%	37405	81%	**65	90%
[Vihtavuori N540]*	<<locked>>	93%	30777	66%	**54	90%
[Winchester 748]*	<<locked>>	93%	36608	79%	**75	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data